Lego Lightsaber

Grab your box, clear some floor space, and let's get building your very own lightsabre.

Assemble the White Core Handle

Connect all white bricks by using two at a time and alternating direction to form a sturdy, dual-brick wide core. Keep building until you have used all bricks.

Adding the Coloured Blade Plates

Now that the core is built, cap the very tip with the coloured brick, this is the top. From the top place one coloured plate on all sides and repeat down the core on all sides, they will firmly lock the white core pieces together and create the blade.

With the blade section built, it’s time to move down the handle and construct a hilt grip using your tan, yellow, grey and black pieces.

Adding the Tan Base Plates

Take three tan plates and place them onto the exposed white core section right where the coloured plate ends on one side. Repeat on all sides and this will leave a short section of white core exposed at the very bottom. Place the yellow plates around the lower edge of the tan section to create a bright collar ring. Remove any white bricks – these are extra.

Mounting the Crossguard/Emitter Shrouds

Where the tan handle meets the coloured plate, attach one black curved brick and repeat this step on all sides to create a balanced, symmetric guard flanking the blade. Place a dark grey shield tile directly below the black on the face of the tan handle, pointing downward. Again repeat for all sides. Place three light grey grill tiles directly underneath each other and the shield piece. Repeat for all sides. Using another black curved brick, place it directly under the light grey grills and over the yellow plates at the very bottom tip of the hilt to cap off. This secures the bottom edge and balances out the black accents at both ends of your handle. Repeat again on all sides.

Build Complete!

The box includes a few extra handle pieces if you wish to customise it. Enjoy your brand-new creation!

Google Sites

Report abuse